Sherwood RD-5503 Provozní pokyny stáhnout pdf (Strana 35)

ENGLISH

SETTING THE CH LEVEL

■Note : Depending on the speaker settings ("N (None or No)"), some channels cannot be selected.

• The LFE level can be adjusted within the range of -10 ~ 0

dB and other channel levels within the range of -15 ~ +15 dB

• In general, we recommend the LFE level to be adjusted to

0 dB. If the recommended levels seem too high, lower

setting as necessary.

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to

select the desired channel.

2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to

adjust the level of the selected channel or program

source's LFE as desired.

3. Repeat the above steps 1 and 2 to adjust each

channel level.

• You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("CAL"),

not into preset memory ("REF 1", "REF 2")

• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit

your tastes. (For details, refer to "Adjusting each channel level with test tone" on page 18.)

Adjusting the current channel level

Example) When selecting Dolby Digital source's LFE

RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 118 119

Žádné komentáře

Sherwood RD-5503 Provozní pokyny Strana 35