Sherwood R-945 Průvodce řešením problémů stáhnout pdf (Strana 17)

Adjust the volume levels of the speakers

until they all sound equally loud.

Press the TEST TONE

button to adjust the volume

level of each speaker.

Memorize the desired subwoofer mode

while it flickers.

󳀏The rear L and R volume levels are adjusted

respectively during the test tone function and all

together while enjoying surround sounds.

󳀏If the subwoofer display disappears, start from the

above step 2 again.

In DTS, Dolby Digital(AC -3), Dolby Pro

Logic or Dolby 3 Stereo mode

CENTER LEVEL

REAR LEVEL

Select the desired subwoofer mode.

󳀏Each time this button is pressed, the subwoofer

mode changes and flickers for 5 seconds as follows;

󳂸

YES : When using a subwoofer.

󳂸

NO : When not using a subwoofer.

󳀏In case that the front speaker mode is set to

“SMALL”, if the subwoofer mode is set to “NO”,

then the front speaker mode is automatically set to

“LARGE”.

󳀏Test tone will be heard form each speaker for 2

seconds each as follows;

󳂵 FRONT L󳂵 CENTER󳂵FRONT R󳂵REAR R󳂵REAR L󳂵SUB

󳀏The test tone will be heard from the subwoofer only

when subwoofer is set to “YES” in the DTS mode

and the Dolby Digital(AC-3) mode.

󳀏Test tone is not heard from rear speakers in Dolby 3

Stereo mode.

󳀏Test tone is not heard from the speaker of which the

setting is adjusted to the NONE or the NO mode.

MEMO / ENTER

Memorize the desired rear

speaker mode while it flickers.

󳀏The desired rear speaker mode is memorized and then

it enters the subwoofer mode.

󳀏If the rear speaker display disappears, start from the

above step 2 again.

Checking the speaker setting

SPEAKER

MODE

SPEAKER

MODE

󳀏Each time this button is pressed briefly, the

corresponding speaker settings are displayed in turn.

ENGLISH

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Sherwood R-945 Průvodce řešením problémů Strana 17

Komentáře k této Příručce

Související produkty a manuály pro Přijímač Sherwood R-945